8x GEthernet PoE+120W budget,2x1G SFP/ RJ-45 uplinks
Enterprise Switches Item Code: C1000-8FP-E-2G-L
UOM : Unit
Available on backorder
Cisco C1000-8FP-E-2G-L. Shouki Electronics
All models of Cisco like C1000-8FP-E-2G-L are here for you. Catalyst POE C1000-8FP-E-2G-L is supplied by Dubai Distributor of Cisco Shouki Electronics. C1000 8FP-E Switches support both IEEE 802.3af PoE and IEEE 802.3at PoE+ (up to 30W per port) to deliver a lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet® and Catalyst wireless access points, or other standards-compliant PoE and PoE+ end devices. Also, PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
Advanced features and specification of C1000 8FP-E
Safety:
UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1
GB 4943.1-2011
EMC: Emissions:
47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A
EMC: Immunity:
EN55024 (including EN 61000-4-5), EN300386, KN35
Environmental:
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Telco:
Common Language Equipment Identifier (CLEI) code
Catalyst POE C1000 8FP-E highlights
- 2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks or 4 fixed 0 Gigabit Ethernet Enhanced SFP (SFP+) uplinks
- CLI and/or intuitive web UI manageability options
- Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard for all Cisco C1000-8FP-E-2G-L
- Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console access
- Reliability with a higher Mean Time Between Failures (MTBF) and an enhanced limited lifetime warranty support(E-LLW)
Key features and benefits:
- Loop detection is a new method to detect network loops in the absence of STP.
- DHCP auto configuration of multiple switches through a boot server eases switch deployment.
- Automatic Media-Dependent Interface Crossover (MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.
- Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting for all Cisco C1000 8FP-E
- Multidomain authentication to allow an IP phone and a PC to authenticate on the same switch port while being placed on the appropriate voice and data VLANs.
More information and comparison for Catalyst POE C1000-8FP-E-2G-L
For more details you can go to the Cisco official website. You can also compare C1000-8FP-E-2G-L
with 2 related items WAP371-E-K9 and CBW240AC-E
How to place order of Catalyst POE C1000 8FP-E
All C1000 8FP-E and other related items are ready in Cisco Distributor in Dubai. If you are in Middle east countries like Iraq, Ethiopia or Turkmenistan, please feel free to contact us.
Product Details
| Maximum STP instances | 64 |
| RJ-45 Ethernet | 8 |
| WebGUI | Yes |
| PoE+power budget | 120W |
| Switching bandwidth | 10 Gbps |
| DRAM | 512 mb |
| Gigabit Ethernet ports | 8 |
| Bluetooth | Yes |
| USB-A port for storage and Bluetooth console | 1 |
| fan | no |
| Uplink interfaces | 2 SFP/ RJ-45 combo |
| CPU | ARM v7 800 MHz |
| Forwarding bandwidth | 20 Gbps |
| USB mini-B | 1 |